Garage door is the largest moving part in every home. It is opened and closed several times in a day during all seasons. This will certainly make the parts wear and tear and get misaligned over a period of time. If you would like to see your garage door working properly for years to come, it is necessary that you do the right type of preventive care that the experts advise you.

Inspect and listen
Every time you use the garage door, it is important that you closely observe its operation. If you find some jerks at some positions or if it makes some grinding noises, then there could be some issue with its parts or alignment. It is also essential that the pulleys, cables and springs on either side of the door look symmetrical.

Check the hardware
Since the huge garage door is prone to create a lot of vibration while moving up and down, the hardware is bound to get loosened over time. Use a socket wrench to tighten the roller brackets and bolts from time to time.

Check the balance of the door
If the door is not balanced properly, the garage door opener is going to be strained too much to operate it. This will ruin the lifetime of the opener. Pull in the release handle or cord and disconnect the opener. Now manually move the door halfway upwards. If the door does not stay in this position, it only means that the springs that make up the counterweight system are not balanced properly. Know that it is never advisable to meddle with the garage door springs and this takes should be left to professionals to handle.

Check the rollers
The two kinds of rollers used in a garage door are steel or nylon. At least twice in a year, inspect them and check if any of them is worn, cracked or chipped. Such rollers must be replaced immediately. This can be done by removing and reinstalling any roller brackets that are not attached directly to the cable system.

Lubricate the parts
Greasing the moving parts of your garage door is a sure way to add years of hassle free operation to your garage door. You must use white lithium grease on the opener’s chain or screw in addition to a spray lubricant for coating the overhead springs.

Check the cables
The garage door cables that lift your garage door are under heavy tension and meddling with them can be fatal or seriously injuring. Make use of the services of a professional to check their condition. It is important to check if there are any broken strands and damages near the bottom roller bracket.

Clean the tracks
Ensure that the tracks on either side of the garage door are clean without any deposition of debris. Use a lever to check the plumb. Remember any major adjustments tot eh tracks must be attempted by a garage door repair Ottawa professional only.

By doing the regular maintenance chores and not overlooking any faults, you can ensure that your garage door works seamlessly for years giving you peace of mind and the best value for your investment.

For more information about Garage Door Repair Ottawa and Garage Door Repair Calgary Please visit : Garage Doors Company.

Comments

comments